The penetration rate of new energy passenger vehicles is approaching 70%. Data from the Passenger Car Association shows that domestic new energy retail penetration reached 67.5% in October 2026. However, the higher the penetration rate, the more urgently the long-standing challenge of battery safety needs a systematic response, as it not only affects individual users' car-buying decisions but also relates to the long-term sustainable development of the entire new energy vehicle industry.
Positive changes are accelerating. At the policy level, starting July 1, 2026, the mandatory national standard "Safety Requirements for Traction Batteries for Electric Vehicles" (GB 38031-2025) officially took effect. The thermal diffusion test requirement was upgraded from "no fire or explosion within 5 minutes after thermal runaway and providing a thermal event alarm" to no fire or explosion, with smoke not allowed to harm occupants. This means safety has become a "mandatory question" for all newly declared vehicle models. After the threshold was raised, a deeper question surfaced: when safety standards rise further, how should automakers involved respond? Even when both pass the national standard, a standardized solution and a solution custom-defined for user scenarios may have completely different levels of redundancy when facing real risks. The difference may not lie in the generic parameters of the battery cells, but in the power of definition.
In the past, automakers purchased standardized full-pack solutions from battery manufacturers, and the battery was akin to a "black box" — automakers did not control the intermediate material formulas, manufacturing processes, or safety logic. While standardized solutions can meet general safety requirements, they struggle to provide targeted design for specific risk scenarios. Automakers, however, face users directly and possess a natural advantage in understanding usage scenarios and enhancing safety redundancy. The Aurora battery equipped in the BAIC Xingtan 5X is a systematic achievement showcase by BAIC Motor (01958) at this watershed moment in new energy vehicle development, built on 17 years of BAIC's in-house battery research and development.
From Standard Solutions to Self-Definition: Delving into the Safety Logic of the Aurora Battery
The BAIC Xingtan 5X, launched on November 12, not only achieved delivery upon launch but also specifically tailored a dedicated battery solution for users of family off-road scenarios in terms of battery technology. In daily usage scenarios, off-roading is arguably one of the most demanding categories for battery safety. Urban users typically worry about "whether the battery will spontaneously combust," while off-road users have additional questions: will the battery pack deform after bottoming out? Is insulation still normal after wading through water? After parking overnight at minus 20 degrees Celsius, will it still start normally the next day? When climbing slopes in high temperatures, will power suddenly be derated? These questions point to the same fact: general safety standards cannot cover every scenario one by one, because standardized battery packs satisfy "safety under average operating conditions," but safety requirements in off-road scenarios are non-uniform and non-standard. Whether a battery pack that passes national standard tests in the laboratory has sufficient safety redundancy in extreme field environments remains a question mark.
In this situation, relying on a single standardized solution is clearly insufficient. Structural protection, thermal management strategies, and BMS monitoring logic — these system-level designs all need to be re-derived around specific user scenarios. This precisely requires the party that best understands the scenarios to lead the definition — the Aurora battery is the result of BAIC translating this scenario understanding into a product. It is independently defined, led in design and development, and quality-controlled by BAIC, with its safety logic derived from real-world vehicle usage scenarios one by one.
At the passive safety level, the Aurora battery pack's 8-layer protective structure establishes defenses layer by layer from bottom to top. When driving on rough roads and over gravel, the resin protective material at the very bottom blocks debris, while a high-strength steel bottom guard plate resists bottoming out. In the event of a collision, buffer foam absorbs energy, the cooling plate controls temperature, and the "keel" framework resists pressure. In the event of thermal runaway, a ceramic composite strip at the top of the cells blocks thermal propagation. When wading through water, the box cover seals against water, with IP68 waterproof rating enabling 2 hours of immersion at 1.5 meters depth without water ingress. One particularly notable point is that the battery pack is positioned higher than the subframe, so the subframe takes the first impact when scraping the bottom. Under official test conditions, the extended-range battery pack can withstand 100kN (equivalent to 10 tons of weight) of frontal and side extrusion on the battery's weakest area without cell fire or explosion, without insulation failure of the entire pack, and meets the requirement of no fire or explosion and no coolant leakage after a frontal collision at a relative speed of 50 km/h between two vehicles.
At the active safety level, traditional BMS mainly monitors voltage, temperature, and current thresholds, acting more like after-the-fact alarms. Under national standard requirements, monitoring lasts for 1 hour after power-off, and after the vehicle enters sleep mode, the battery is essentially unguarded. The Aurora battery extends BMS monitoring to 24-hour full-time protection, with single-point fault diagnosis coverage SPFM ≥ 99% and latent fault coverage LFM ≥ 90% — in plain terms, even if a sensor fails or a fault is still in its latent period and has not yet manifested, the system can identify it. On this basis, BAIC's first mass-produced AI battery early warning model, based on the Transformer network, covers six major fault modes including self-discharge anomalies, sudden thermal runaway, connection anomalies, insulation failure, and capacity degradation, achieving early warning 7 days in advance with accuracy ≥ 95%. From "knowing only after something happens" to early intervention, this is precisely thanks to BAIC's independent definition of the entire logic architecture from BMS monitoring strategies to cloud-based AI early warning.
Low-temperature performance and charge-discharge capability are also areas where BAIC's independent definition comes into play. The Aurora battery's wide-temperature-range material system and intelligent thermal management achieve extreme cold starts at minus 35 degrees Celsius, introduction of engine waste heat into the battery within 8 minutes at minus 20 degrees Celsius, and no power degradation at high temperatures of 50 degrees Celsius. More notably, the Aurora battery optimized the material pairing and coating methods of the positive and negative electrodes together, making charging and discharging faster and smoother without sacrificing safety margins, while maintaining battery capacity.
Centralized Validation of 17 Years of Accumulation: How to Understand the "Evolution" of BAIC Motor (01958)?
While automakers defining their own batteries certainly offers the opportunity to push safety redundancy to a higher level, implementation is an interdisciplinary engineering challenge. Cell electrochemistry establishes underlying performance, thermal management needs to stabilize the operating range across enormous temperature differences, BMS must complete state determination and fault isolation at millisecond speed, and structural safety must cover various unconventional impacts. More challenging is that subsystems do not exist in isolation: the battery pack is deeply coupled with the vehicle chassis, and BMS strategies are strongly bound to thermal management, making it nearly impossible to develop a universal solution applicable everywhere apart from a specific vehicle model. This may also be why many automakers, despite having the intention to pursue this, find it difficult to complete a full system definition.
However, BAIC's accumulation on this front is far longer than most people might expect. BAIC began power battery research and development as early as 2009, and has gone through 5 technology iterations to date. Zhitong Finance notes that several "first to try" moves in the industry have BAIC behind them: being the first to scale up battery swap technology, jointly launching and mass-producing the world's first CTP module-less battery pack, and independently developing permanent thermal blocking technology. In addition, BAIC is one of the core drafting units of the first batch of mandatory national standards for electric vehicles, and has deeply participated in the formulation of over 80 national, industry, and group standards, making it one of the primary formulators of the new national standard for battery safety.
Of course, qualification does not equal results — whether the definition is correct still depends on market validation. Here, the origin of the Aurora battery must be mentioned. Before being installed in the BAIC Xingtan 5X, the Aurora battery had already been applied at scale across multiple new energy vehicle models under BAIC. Going further back in the timeline, in order to verify whether this system definition was sufficiently safe, BAIC invested 2 billion yuan to build its own battery testing laboratory, setting up 121 major test categories and over 150 minor test items. The Aurora battery only began delivery after passing all items. It further achieved the high standard of "meeting the new national standard one year ahead of schedule, with multiple indicators exceeding the new national standard by up to 96 times."
Looking back at the question raised at the beginning, when the industry's safety threshold rises, the differentiated answers from automakers may be hidden in BAIC's practice: based on deep understanding of user scenarios and long-term in-house research accumulation, achieving ultimate safety through independent definition. In the view of Zhitong Finance, behind the launch of the BAIC Xingtan 5X, from purchasing standard solutions externally to independently defining batteries, BAIC Motor (01958) has completed the leap from "meeting standards" to "fitting scenarios," and the confidence supporting this leap is precisely its accumulation and precipitation of in-house technology research and development.
Comments