Zhongding Sealing's 1.9 Billion Yuan Convertible Bond Bet on Robotics: A Veteran Auto Parts Maker's New Battlefield

Deep News10-26

Over the past two years, humanoid robots have moved from exhibition booths to production lines, and the excitement has traveled up the supply chain: reducers, sensors, actuators, dexterous hands — every moving part on a robot has a group of companies scrambling to build it, and many of them are former automotive parts suppliers. Anhui Zhongding Sealing Parts Co.,Ltd. (000887.SZ) is one of them. The company has spent more than forty years making automotive rubber components — seals, cooling hoses, air suspension — for vehicle manufacturers worldwide. In 2024, it put up 50 million yuan to register a robotics subsidiary; in March 2026, the first humanoid robot prototype was assembled. On October 22, Zhongding issued 1.92 billion yuan of convertible bonds, the "Zhongding Convertible 03." The single largest destination for the money is robot joints — 732 million yuan going into a smart robot core joint manufacturing project — with the remainder directed toward thermal management assemblies, an intelligent chassis R&D and settlement center, and 500 million yuan to supplement working capital. This is also the largest bond issuance in the company's history.

According to the prospectus, once all three production projects reach full capacity, they will together add 3.618 billion yuan in annual revenue, equivalent to 18.3% of full-year 2025 revenue. Thermal management would contribute 2.347 billion yuan, while the two robotics projects would combine for 1.27 billion yuan. But the construction period runs two years, and after production begins, depreciation on the new lines will hit the income statement before orders do. This is already Zhongding's third convertible bond issuance. The previous two both ultimately relied on share price gains, with the vast majority converting into equity, sparing the company from large cash redemptions. When it issued its first convertible bond in 2011, Zhongding's annual revenue was 3.053 billion yuan; fifteen years later, with its third convertible bond, that figure has become 19.8 billion yuan — more than six times the earlier level — and the fundraising projects have shifted from rubber parts to robot joints.

Shareholders Take Seven Tenths of the Allocation, With the First Two Nearly Fully Converted

The convertible bond Zhongding is issuing is mainly directed at robot joints, thermal management liquid cooling, and working capital supplementation, totaling 1.92 billion yuan, with the smart robot core joint manufacturing project taking 732 million yuan, or nearly 40%. This is Zhongding's third convertible bond in fifteen years and its largest, following the previous two of 300 million yuan and 1.2 billion yuan. The coupon rate rises over six years: 0.1%, 0.3%, 0.6%, 1.5%, 1.8%, and 2%. If holders never convert by maturity, the company must redeem each bond at 108 yuan, for a total payout of 2.074 billion yuan. Under the rules, the conversion price must be no lower than the average share price over the 20 trading days before the issuance announcement and the prior trading day, and it can only be revised downward, never upward. The conversion price was set at 18.2 yuan, and the conversion period does not begin until April 2027, six months after issuance; the company's shares closed at 17.38 yuan on October 26, below the conversion price. The forced redemption trigger price is 23.66 yuan, meaning that if the stock closes at or above that level on 15 of 30 consecutive trading days, the company has the right to buy back the convertible bonds at face value plus interest. In that scenario, holders almost always convert, because the shares they receive are worth more than the redemption payment.

The buyers of this bond are already determined. According to the allocation results, existing shareholders received priority allocation equal to 74.59% of the total issuance: controlling shareholder Zhongding Holding Group was allotted about 777 million yuan, while actual controllers Xia Dinghu and his son Xia Yingsong each received only 8,090 and 8,733 units, bringing the three together to about 779 million yuan, or 40.55%. Other existing shareholders were allotted about 654 million yuan, or 34.04%. Online subscriptions accounted for 25.41%, corresponding to 488 million yuan. In the allotment results announced on October 26, 487,900 winning numbers were drawn from 9.325 billion subscription numbers, with each number entitled to 10 bonds, or 1,000 yuan, for a winning rate of five in 100,000. Winners must have sufficient subscription funds in place by the end of the day on the 26th, and any abandoned portion will be underwritten by lead manager Industrial Securities (601377.SH).

Zhongding's previous convertible bond was issued in 2019, and the one before that in 2011. Both triggered forced redemption during their terms and were delisted early, with most converting into equity through share price gains. Whether the third can replicate the first two depends on the share price. If it rises, the 1.92 billion yuan will become equity just as before; if not, six years from now the second outcome awaits — a payout of 2.074 billion yuan. The company itself is not short of money. At the end of June, it held 4.176 billion yuan in monetary funds and 6.419 billion yuan in interest-bearing debt, with a debt-to-asset ratio of 45.2%, down more than two percentage points from the end of 2025. The current ratio stood at 1.82, and first-half operating cash flow was a net inflow of 758 million yuan, up more than 20% year on year. What is truly consuming cash is the factories and production lines under construction. In the half-year report, construction in progress rose 38.5% from the start of the year, as new projects in robotics and liquid cooling continued to absorb investment — and this bond issuance is mainly meant to plug that gap.

Nearly Seventy Percent of the Funds Go to Robot Joints and Liquid Cooling

Looking at the specific flow of funds from this fundraising, the two manufacturing projects take nearly 70%. Smart robot core joint manufacturing is planned to receive 732 million yuan, smart thermal management system assemblies (including data center liquid cooling) 582 million yuan, with another 106 million yuan for the new energy vehicle intelligent chassis R&D and settlement center project and 500 million yuan to supplement working capital.

The robotics project is undertaken by a subsidiary less than two years old. In December 2024, Zhongding set up a wholly owned subsidiary, Anhui Ruisibo Robotics Technology Co., Ltd. ("Ruisibo"), with 50 million yuan of its own funds. Its legal representative is chairman Xia Yingsong, and its business scope covers the production and supporting of robot components and servo control mechanisms. The 732 million yuan will go to this company. Once the project is completed, Ruisibo will be able to produce 150,000 harmonic reducers, 150,000 sensors, and 280,000 joints of various types annually. Its current status, however, is that in the first half it completed 60 units of humanoid robot contract manufacturing, with harmonic reducers supplied in small batches; the company's wording in the half-year report is that "large-scale production capacity has not yet been formed overall."

The liquid cooling project shows an even bigger gap. According to the half-year report, the project is planned for annual capacity of 15.66 million units, including about 650,000 data center liquid cooling components. Yet the liquid cooling orders the company has already obtained have a total output value of only about 43 million yuan. As for cooperation in AI computing, the 10,000-GPU cluster, Token factory, Unicom green computing, and Tencent Cloud are all still framework agreements that have generated no revenue. Once the two projects are completed, annual新增 depreciation and amortization will be as much as about 122 million yuan, and these costs will hit the income statement before orders do.

The technical foundations for both lines come from two German companies. One is AMK, acquired by Zhongding in July 2016 for 130 million euros. It makes servo motors and chassis electronic controls, and its customer list includes Tesla, Mercedes-Benz, and BMW. Zhongding's air suspension segment today is built on it, and the servo and electronic control used in robot joints are precisely its original specialty. The other is TFH, acquired in February 2017 for an actual payment of 170 million euros. It makes engine cooling and new energy battery cooling lines, and it is the core of thermal management, Zhongding's largest segment today; the fluid lines and heat exchange used in the liquid cooling project are also its original specialty. Investing in these two directions was not a sudden impulse. Growth in the company's main automotive rubber parts business has fallen to the single digits, and its largest segment, thermal management, is still declining, so the company needs a new growth curve. Robot joints and liquid cooling happen to be two directions where existing expertise can be directly transferred — moving the same set of technologies into new scenarios.

In the first half of 2026, Zhongding's operating revenue was 10.091 billion yuan, up 2.48% year on year, a slower pace than for full-year 2025. The five major segments diverged: air suspension at 620 million yuan, up 9.15%, the fastest-growing piece; lightweighting at 1.643 billion yuan, up 6.31%; sealing systems at 1.948 billion yuan, up 0.28%; rubber business at 2.035 billion yuan, down 0.35%; and the largest segment, cooling systems (thermal management), at 2.488 billion yuan, down 4.54% year on year, the biggest decline.

Slow-growing segments are not necessarily unprofitable. The highest gross margin belongs to the sealing business where Zhongding got its start; first-half revenue rose only 0.28%, but its 29.15% gross margin remains among the highest of the major segments. Lightweighting is the opposite: revenue runs fast, but gross margin is only 12.86%, down 5.41 percentage points from a year earlier. By region, domestic revenue was 5.652 billion yuan, or 56.01%, with a gross margin of 28.86%; overseas revenue was 4.439 billion yuan, or 43.99%, with a gross margin of 18.54%. In 2025, net profit attributable to shareholders was 1.589 billion yuan, up nearly 30% year on year; non-recurring-adjusted net profit was only 1.081 billion yuan, up just 0.56%, with the difference of more than 500 million yuan coming from non-recurring gains and losses. In the first half of 2026 it was the reverse: non-recurring-adjusted profit of 806 million yuan exceeded attributable net profit of 680 million yuan, with the difference made up of two losses — a 249 million yuan fair value loss on other non-current financial assets and a 49.8659 million yuan net exchange loss. Strip those two items out, and the core business has been earning just over 1 billion yuan for the past three years.

The Father and Son of Ningguo: A 21-Country Map Built by Acquisition, and 2 Billion Yuan of Goodwill

Zhongding's founder is Xia Dinghu, born in 1944 and now 82 years old, a senior engineer. The company's actual controllers today are him and his son Xia Yingsong, two generations of the same family. In 1980, Xia Dinghu started at a county-run seal factory in Ningguo, Anhui Province, making rubber sealing rings — the pieces placed at the joint between two parts in engines and transmissions to keep oil inside the machine and dust and moisture outside. The trademark registered for the factory's products back then took two characters from his name and was called "Dinghu," which is still in use today. Zhongding's family fortune was accumulated by two generations. For the first four decades, Xia Dinghu steered the company, from a small county factory in 1980 to a Shenzhen Stock Exchange listing in 2007, and on to building its main business into one of the world's leading players, only stepping down as chairman in 2020. It was mainly his son Xia Yingsong, born in 1977, who spread the map globally, and his approach was overseas acquisition. In 2003, Xia Yingsong orchestrated Zhongding's first overseas acquisition; over the following eleven years, the company reached eight countries including South Korea, Germany, and the United States, buying mostly peer factories in rubber sealing, vibration and noise reduction, seeking their technology, customers, and channels. The acquisitions did not stop there. In the years after, it successively bought Germany's WEGU, which makes vibration-damping components, AMK, which makes air suspension electronic controls, and TFH, which makes cooling lines, with individual deal sizes rising from tens of millions of euros to hundreds of millions. After more than two decades of buying, Zhongding's map now spans 21 countries, 48 manufacturing bases, 41 R&D centers, and 29,000 employees, ranking eighth globally in the non-tire rubber products industry.

After handing over the reins, Xia Dinghu did not exit operations and remains the company's actual controller; his daughter Xia Yujie is a National People's Congress deputy. Control of the enterprise has always remained in the hands of the Xia family. These acquisitions left substantial goodwill on the books. As of the end of June 2026, Zhongding's goodwill carrying value was 2.03 billion yuan, mainly formed by the overseas acquisitions of KACO, WEGU, AMK, and TFH; cumulative impairment provisions already totaled 483 million yuan, nearly one fifth of the goodwill balance. In the half-year report's impairment testing, the recoverable amounts of the AMK and TFH asset groups had already fallen below their carrying values. Goodwill itself does not generate cash flow, and accounting standards require it to be allocated to asset groups at each year end to compare against "how much can be recovered," with any shortfall charged directly — cutting current profit — and once recognized, it cannot be reversed. Over the past two decades, the technology for several of Zhongding's new business lines was largely bought along with the companies: air suspension from AMK, thermal management from TFH, high-end sealing from KACO. This time it has switched to building its own: robot joint assemblies, harmonic reducers, and data center liquid cooling are all self-built projects. Acquisitions deliver ready-made technology, customers, and production lines, while self-building requires going through R&D, customer validation, and mass production on its own. Beyond the two-year construction period, capacity ramp-up will also take time.

Back to the convertible bond: the vast majority of conversions in the first two issues occurred after the forced redemption announcement, taking three and a half years and less than three years respectively. From the current share price of 17.38 yuan to the forced redemption price of 23.66 yuan, the stock still needs to rise about 36%. Whether the third issue can repeat the outcome of the first two depends on whether robot joints and liquid cooling can be turned into revenue during the six-year term and thereby support a higher share price. Are you optimistic about Zhongding's robotics business? Within six years, can its share price reach 23.66 yuan?

Disclaimer: Investing carries risk. This is not financial advice. The above content should not be regarded as an offer, recommendation, or solicitation on acquiring or disposing of any financial products, any associated discussions, comments, or posts by author or other users should not be considered as such either. It is solely for general information purpose only, which does not consider your own investment objectives, financial situations or needs. TTM assumes no responsibility or warranty for the accuracy and completeness of the information, investors should do their own research and may seek professional advice before investing.

Comments

We need your insight to fill this gap
Leave a comment